HPT
Features
- 15, 30, 46 & 61 W/m @ 10°C
- Tmax maintain 210°C
- 110-120, 208-277 & 480 Vac
Application
Thermon high performance HPT power-limiting heating cables are designed specifically for process temperature maintenance up to 210°C and freeze protection where high maintain temperatures or high temperature exposure is required. HPT heating cables can be installed on piping, tanks, vessels and equipment. When powered off these cables can withstand continuous exposure temperatures of up to 260°C. All HPT heating cables have a fluoropolymer (FOJ) overjacket which provides high chemical resistance against aggressive organics and corrosives.
A coiled resistor alloy heating element provides the powerlimiting feature of HPT. This PTC (Positive Temperature Coefficient) characteristic decreases the cable’s power output as the heat-traced product temperature increases and allows the cable to be overlapped during installation. The composite construction of the heating element and fiber substrate, plus an additional fiber cushion layer, provide an exceptionally durable high performance heating cable.
HPT cables are approved for use in ordinary (nonclassified) areas, hazardous (classified) areas, and Zone 1 and 2 classified areas.
Features
- Pipe freeze protection and temperature maintenance up to 210°C
- Maximum exposure temperature of 260°C
- PTC coiled resistive alloy heating element
- Available service voltages 110 to 120, 208 to 277 and 480 Vac
- Cut-to-length parallel circuitry
- Nickel-plated copper bus wires
- Metallic braid for grounding purposes
- Fluoropolymer (FOJ) overjacket
- Worldwide approvals
- Compatible with user-friendly and easy to install Thermon components
| SKU | P/N | Item | Power output @ 10°C | Zone length | Voltage (Vac) | Tmax maintain | Overjacket |
|---|---|---|---|---|---|---|---|
| TMN.A02.005 | 25812 | HPT 5-2-OJ | 15 W/m, 230 Vac | 76 cm | 208-277 | 210°C | Fluoropolymer |
| TMN.A02.001 | 25802 | HPT 5-1-OJ | 16 W/m, 120 Vac | 61 cm | 110-120 | 210°C | Fluoropolymer |
| TMN.A02.009 | 25402 | HPT 5-4-OJ | 16 W/m, 480 Vac | 152 cm | 480 | 210°C | Fluoropolymer |
| TMN.A02.006 | 25832 | HPT 10-2-OJ | 30 W/m, 230 Vac | 61 cm | 208-277 | 190°C | Fluoropolymer |
| TMN.A02.002 | 25822 | HPT 10-1-OJ | 33 W/m, 120 Vac | 46 cm | 110-120 | 190°C | Fluoropolymer |
| TMN.A02.010 | 25412 | HPT 10-4-OJ | 33 W/m, 480 Vac | 122 cm | 480 | 190°C | Fluoropolymer |
| TMN.A02.007 | 25852 | HPT 15-2-OJ | 46 W/m, 230 Vac | 61 cm | 208-277 | 175°C | Fluoropolymer |
| TMN.A02.003 | 25842 | HPT 15-1-OJ | 49 W/m, 120 Vac | 46 cm | 110-120 | 175°C | Fluoropolymer |
| TMN.A02.011 | 25422 | HPT 15-4 OJ | 49 W/m, 480 Vac | 122 cm | 480 | 175°C | Fluoropolymer |
| TMN.A02.008 | 25872 | HPT 20-2-OJ | 61 W/m, 230 Vac | 61 cm | 208-277 | 150°C | Fluoropolymer |
| TMN.A02.004 | 25862 | HPT 20-1-OJ | 66 W/m, 120 Vac | 30 cm | 110-120 | 150°C | Fluoropolymer |
| TMN.A02.012 | 25432 | HPT 20-4-OJ | 66 W/m, 480 Vac | 102 cm | 480 | 150°C | Fluoropolymer |
Resources
Datasheet
English (Europe) datasheet
English (Americas) datasheet
English (Americas) datasheet 480V
Installation manual
English (Europe) installation instructions
English (Americas) installation instructions
Certifications/Approvals
CE Ex
FM13 ATEX 28 according to EU ATEX-directive 94/9/EC
IEC IECEx
FMG 06.0006
FM Approvals
Ordinary Locations
Hazardous (Classified) Locations
Class I, Division 2, Groups B, C and D
Class II, Division 2, Groups F and G*
Class III, Divisions 1 and 2
Class I, Zones 1 and 2, AEx eb IIC; AEx tb IIIC
*CL. II, Div. 2 requires Thermon design review
Canadian Standards Association
Ordinary Locations
Hazardous (Classified) Locations
Class I, Divisions 1 and 2, Groups A, B, C and D
Class II, Divisions 1 and 2, Groups E, F and G
Ex eb IIC
Specifications
General
- Manufacturer
- Thermon
- Unit of measurement
- Meter
Ratings
- Available watt densities at 230 Vac
- 15, 30, 46, 61 W/m @ 10°C
- Available watt densities at 240 Vac
- 16, 33, 49, 66 W/m @ 10°C
- Supply voltages
- 120, 240, 480, 575 Vac
- Maximum maintain temperature
- 150°C to 210°C
- Maximum continuous exposure temperature
- Power-off 260°C
- Minimum installation temperature
- -51°C
- Minimum bend radius
- -15°C = 10 mm | -51°C = 32 mm
- T-rating
- T2 to T6 (based on stabilized design)