FP
Features
- 8, 15, 24 & 33 W/m
- Tmax maintain 65°C
- 110-120, 208-277, 480 & 575 Vac
Application
Thermon FP parallel resistance constant wattage heating cables are designed to provide freeze protection and process temperature maintenance for temperatures up to 65°C. FP heating cables can be installed on piping, tanks, vessels and equipment. When powered off these cables can withstand continuous exposure temperatures of up to 204°C. All FP cables have a fluoropolymer (FOJ) overjacket which provides high chemical resistance against aggressive organics and corrosives.
The parallel resistance configuration allows the cables to be cut to length and terminated in the field with easy-to-use Thermon kits. FP cables provide consistent and reliable heat outputs regardless of circuit length and are not subject to the inrush current (also known as startup current) associated with self-regulating heating cables. Therefore the need for over sizing power distribution equipment is eliminated.
FP cables are approved for use in ordinary (nonclassified) areas, hazardous (classified) areas and Zone 2 classified areas.
Features
- Pipe freeze protection and temperature maintenance up to 65°C
- Maximum exposure temperature of 204°C
- Extended circuit lengths of up to 399 meters
- Available service voltages 120, 240, 480 and 575 Vac
- Cut-to-length parallel circuitry
- Nichrome heating element
- 4 mm² copper bus wires
- Metallic braid for grounding purposes
- Fluoropolymer (FOJ) overjacket
- Worldwide approvals
- Compatible with user-friendly and easy to install Thermon components
| SKU | P/N | Item | Power output | Zone length | Voltage (Vac) | Overjacket |
|---|---|---|---|---|---|---|
| TMN.A03.002 | 22332 | FP 2.5-2-OJ | 8 W/m, 230 Vac | 137 cm | 230-240 | Fluoropolymer |
| N/A | N/A | FP 2.5-1-OJ | 8 W/m, 120 Vac | 76 cm | 120 | Fluoropolymer |
| TMN.A03.003 | 22342 | FP 5-2-OJ | 15 W/m, 230 Vac | 102 cm | 230-240 | Fluoropolymer |
| N/A | N/A | FP 5-1-OJ | 16 W/m, 120 Vac | 61 cm | 120 | Fluoropolymer |
| TMN.A03.001 | 22387 | FP 8-2-OJ | 24 W/m, 230 Vac | 102 cm | 230 | Fluoropolymer |
| N/A | N/A | FP 8-4-OJ | 18 W/m, 400 Vac | 152 cm | 400 | Fluoropolymer |
| TMN.A03.004 | 22352 | FP 10-2-OJ | 33 W/m, 230 Vac | 76 cm | 230-240 | Fluoropolymer |
| N/A | N/A | FP 10-1-OJ | 33 W/m, 120 Vac | 61 cm | 120 | Fluoropolymer |
| TMN.A03.005 | 22362 | FP 10-4-OJ | 33 W/m, 480 Vac | 137 cm | 480 | Fluoropolymer |
| N/A | N/A | FP 10-5-OJ | 33 W/m, 575 Vac | 168 cm | 575 | Fluoropolymer |
Resources
Datasheet
English (Europe) datasheet
English (Americas) datasheet
Installation manual
English (Europe) installation instructions
English (Americas) installation instructions
Certifications/Approvals
CE Ex
II 2 G Ex e II T3 to T6, II 2 D Ex tD A21 IP66/IP67
T200 °C to T85 °C FM 07ATEX0016
IEC IECEx
FMG 06.0008
FM Approvals
Ordinary Locations
Hazardous (Classified) Locations
Class I, Division 2, Groups B, C and D
Class II, Division 2, Groups F and G
Class III, Divisions 1 and 2
Class I, Zones 1 and 2, AEx e II
Underwriters Laboratories Inc.
Ordinary Locations
Hazardous (Classified) Locations
Class I, Division 2, Groups A, B, C and D
Class II, Division 2, Groups F and G
Class III, Divisions 1 and 2
Canadian Standards Association
Ordinary Locations
Hazardous (Classified) Locations
Class I, Divisions 1 & 2, Groups A, B, C and D
Class II, Divisions 1 & 2, Groups E, F and G
Ex e II
Specifications
General
- Manufacturer
- Thermon
- Unit of measurement
- Meter
Ratings
- Available watt densities at 230 Vac
- 8, 15, 24, 33 W/m
- Supply voltages
- 120, 240, 480, 575 Vac
- Maximum maintain temperature
- 65°C
- Maximum continuous exposure temperature
- Power-off 204°C
- Minimum installation temperature
- -60°C
- Minimum bend radius
- -15°C = 10 mm | -60°C = 19 mm