TubeTrace with HTSX
Features
- 9 to 64 W/m @ 10°C
- Tmax maintain 150°C
- Cut-to-length
Application
Thermon TubeTrace, with “cut-to-length” HTSX self-regulating heat tracing, is designed to provide freeze protection or temperature maintenance from 5°C (40°F) to 150°C (302°F) for tubing where high temperature exposure capability is possible. HTSX withstands temperature exposures of 250°C (482°F).
Thermon TubeTrace bundles with HTSX heat trace cables are approved for use in ordinary (nonclassified) areas and hazardous (classified) areas.
Features
- Pipe freeze protection and temperature maintenance up to 150°C (302°F)
- Power output varies in response to the surrounding conditions along the entire length of a circuit
- Lower risk of overheating the tube or product
- Installed cost is lower because “cut-to-length” HTSX cable makes end connections easy with minimal waste
- HTSX cable is approved for use in ordinary (non-classified) areas and hazardous (classified) areas
- Polymer outer jacket (ATP or TPU available)
Resources
Datasheet
English (Europe) datasheet
English (Americas) datasheet
Sales brochure
English (Americas) sales brochure
Product reference legend
English (Europe) reference legend
English (Americas) reference legend
Installation manual
English (Americas) installation instructions
Certifications/Approvals
CE Ex
FM12 ATEX 0014X according to EU ATEX-directive 94/9/EC
IEC IECEx
FMG 12.0004X
FM Approvals (120 and 240 Vac US only)
Ordinary Locations
Hazardous (Classified) Locations
Class I, Division 2, Groups B, C and D
Class II, Division 2, Groups E, F and G
Class III
Canadian Standards Association
Ordinary Locations
Hazardous (Classified) Locations
Canada:
Class I, Division 1, Groups A, B, C and D
Class II, Division 1, Groups E, F and G
Class III
Ex 60079-30-1 IIC Gb
Ex 60079-30-1 IIIC Db
US:
Class I, Division 2, Groups A, B, C and D
Class II, Division 2, Groups E, F and G
Class III
Class I Zone 1 AEx 60079-30-1 IIC Gb
Class II Zone 21 AEx 60079-30-1 IIIC Db
Specifications
General
- Manufacturer
- Thermon
- Unit of measurement
- Meter
Ratings
- Available watt densities (°C) 230 Vac
- 9, 18, 28, 38, 48, 64 W/m @ 10°C
- Available watt densities (°C) 120 Vac
- 10, 20, 30, 39, 49, 66 W/m @ 10°C
- Available watt densities (°F) 120 Vac
- 3, 5, 9, 12, 15, 20 W/ft @ 50°F
- Available watt densities (°F) 230 Vac
- 3, 6, 9, 12, 15, 20 W/ft @ 50°F
- Available watt densities (°F) 120 Vac
- 3, 5, 8, 10 W/ft @ 50°F
- Supply voltages
- 110-120 or 208-277 Vac
- Tube temperature range
- 5°C to 150°C (40°F to 302°F)
- Maximum intermittent exposure temperature
- 250°C (482°F)
- Maximum continuous exposure temperature
- Power-off 205°C (400°F)