SafeTrace SLS
Features
- 24°C to 93°C
- 10 mm, 12 mm, 3/8” & 1/2”
- Copper and stainless steel
Application
Thermon SafeTrace SLS-IT is a metallic tracer tube covered with composite materials that lowers thermal conductance to reduce heat transfer. SafeTrace provides a reduced yet predictable heat output along a traced pipe to prevent hot spots and overheating. It replaces bare metallic tracers that often waste energy and stress pipe works by raising pipe temperatures much higher than necessary or desired.
SafeTraceSLS-IT tracers utilize a safety yellow identification jacket to signify materials potentially dangerous such as steam per ASME/ANSI A13.1-1996. All SafeTrace IT tracers also comply with ASTM Std C-1055, which requires that human skin temperature be less than 58°C when in contact with a hot surface for five seconds.
SafeTrace SLS-IT is supplied in long length coils and may be run continuously from the steam supply manifold, along the pipe and over to the condensate return manifold.
Features
- Significantly reduces risk of burns
- Saves up to 35% of steam consumption compared to bare metal tube
- Predictable heat transfer—no hot spots or overheating
- Faster installation times—can be run continuously from the steam supply to the condensate collection system
- Longer circuit lengths—fewer steam traps
- Simple tape-on installation—not steel banding
- Quick delivery
- Free design assistance with Thermon CompuTrace-ST design software
| SKU | P/N | Item | Tube material | Tube (O.D.) | Wall thickness |
|---|---|---|---|---|---|
| TMN.C02.016 | 5910111 | SLS-IT-3B32 | Copper | 3/8" | 0.032" |
| N/A | N/A | SLS-IT-3A35 | SS welded | 3/8" | 0.035" |
| TMN.C02.018 | 59204 | SLS-IT-3F35 | SS seamless | 3/8" | 0.035" |
| N/A | N/A | SLS-IT-6B1 | Copper | 6 mm | 1 mm |
| N/A | N/A | SLS-IT-8B1 | Copper | 8 mm | 1 mm |
| TMN.C02.014 | 59211 | SLS-IT-10B1 | Copper | 10 mm | 1 mm |
| N/A | N/A | SLS-IT-12B1 | Copper | 12 mm | 1 mm |
| N/A | N/A | SLS-IT-10A1 | SS welded | 10 mm | 1 mm |
| N/A | N/A | SLS-IT-10F1 | SS seamless | 10 mm | 1 mm |
Resources
Datasheet
English (Europe) datasheet
English (Americas) datasheet
Sales brochure
English (Europe) datasheet
Installation manual
English (Americas) installation instructions
Specifications
General
- Manufacturer
- Thermon
- Unit of measurement
- Meter
Specifications
- Available tube diameters
- 10 mm, 12 mm, 3/8” and 1/2”
- Nominal O.D.
- 19 mm (3/4")
- Available tube materials
- Copper & 316 stainless steel
- Typical pipe temperature range
- 24°C to 93°C
- Maximum exposure temperature
- 215°C
- Minimum installation temperature
- -40°C
- Maximum recommended steam pressure
- 17 bar
- Typical maximum jacket temperature
- <58°C